EasyManuals Logo

valent VPRE Series User Manual

Default Icon
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Valent Controls IOM 16 IOM-C1-0616
Part Number 474626
6. Click on the Connect button to establish the
connection between the computer (via UMT)
and the controller.
The UMT software package will connect to the
selected unit and download data from the
individual station. Monitor the progress bar on
the screen for the status of this operation. The
download process should take several minutes.
Platform
When logging into the Platform option, the
Station Director tab is the first screen displayed.
Refer to the UMT Map on page 20 for a complete
list of all points accessible on the UMT.
Platform Administration
Changing the IP Address
Use the TCP/IP Configuration utility to edit the
network address and related parameters for the
controller.
WARNING:
Setting the IP Address to an incorrect value may
cause the controller to lock up and will require
replacing the controller. Make sure the IP
address, gateway, and subnet mask are set
correctly before saving the new settings.
The controller ships with the following default
settings:
JENESYS TCP/IP SETTINGS
IP ADDRESS: 192.168. 1.101
SUBNETMASK: 255.255.255. 0
GATEWAY: 192.168. 1. 1
MENU SAVE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the valent VPRE Series and is the answer not in the manual?

valent VPRE Series Specifications

General IconGeneral
Brandvalent
ModelVPRE Series
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals