Valeo beep & park - User Manual

Product description
Camera module that supervises all 4 driving assistance functions :
• All four functions are housed in the camera module, facing the road.
• The system starts automatically as soon as the vehicle starts and scans the road permanently.
• All of the guideo functions can be easily configured or switched off using the remote control.
• Lane departure alert
• Keep in lane assistance
• Video recording of a potential accident
• Alert that vehicle in front has moved away
1/11
1) The Lane alert function uses an algorithm to detect when
the vehicle crosses white road markings and immediately informs
the driver with an audible alert or voice message. A warning is
given as soon as the vehicle crosses the line, leaving the driver
enough time to regain control of the vehicle.
2) The Optilane function uses an algorithm to spot any vehicle
drift in relation to the road markings and immediately informs the
driver, who can then correct the trajectory accordingly. The driver is
informed as soon as the vehicle drifts to the left or the right for more
than 5 seconds.
The Lane Alert and Optilane functions are deactivated
when the driver uses the indicators. The system is compatible
with white and yellow road markings.
3) The Video box function films 20-second video sequences in
the event of sudden acceleration or deceleration. The system
films the moments immediately before and after an impact.
The videos can then be transfered to a PC via a USB
connection, to be viewed or sent.
The Video box system can also be switched on manually
by the driver at any time.
4) The Beep&watch function uses a change in images to
identify movement in front of the vehicle, and informs the driver
when the car in front has moved off. The system comes on after the
vehicle has been at a standstill for 3 seconds.
What is it ?
How does it work ?

Summary

How does it work?

Lane Alert Function

Detects vehicle crossing road markings and alerts driver.

Optilane Function

Spots vehicle drift relative to road markings and informs driver.

Video Box Function

Films 20-second video sequences during sudden acceleration or deceleration.

Beep&Watch Function

Identifies movement in front and alerts when the car moves off.

Technical specifications

Installation guide

Preparation for installation

Check vehicle readiness and locate essential electrical connections.

Camera module installation

Connecting the guideo system

Start-up and operating test

Final adjustments

Troubleshooting

No sound or video recording issues

Lane departure warning issues

Beep&Watch system issues

Optilane and device heating issues

Lane departure and turn signal conflicts

Valeo beep & park Specifications

General

Type	Parking sensor system
Number of sensors	4
Audible alert	Yes
Power supply	12V DC
Installation recommendation	Professional installation recommended
Sensor detection range	0.3 - 1.5 m
Installation	Rear bumper
Alert Type	Beeper
Compatibility	Universal