Valet VM1200 User Manual

Identifies controls, displays, and indicators on the main master unit.

Identifies controls and buttons on the secondary room units.

Identifies controls and buttons on the external front door/gate units.

Steps to activate the radio function of the intercom system.

Instructions for finding and selecting radio frequencies using tuning keys.

Guide to saving favorite FM and AM stations into the system's memory.

Methods to disable the radio function for the entire system or specific rooms.

Station setting to hear radio, chimes, and intercom conversations.

Station setting for receiving all intercom communications.

Station setting to disable all functions for a particular unit.

Station setting to listen to sounds without active participation.

Procedure to initiate a paging call from the master intercom unit.

Procedure to initiate a paging call from a secondary room station.

How to reply to page calls from either master or room stations.

Steps for using the door/gate function via the master intercom unit.

Steps for using the door/gate function via a room station unit.

Using switches and buttons to unlock electric door or gate latches.

Procedure to listen to sounds from other stations via a room unit.

Procedure to listen to sounds from other stations via the master unit.

Steps to prevent a room station from being monitored by others.

Programming the timer for a single automatic radio turn-on/off event.

Programming the timer for recurring daily automatic radio events.

Procedures to disable or cancel the sleep timer function.

Adjusting system-wide and local volume levels.

Adjusting treble and bass frequencies for audio output.

Using tape and auxiliary inputs for external audio sources.

Solutions for the clock/radio display not showing any information.

Troubleshooting steps when the radio fails to activate.

Diagnosing and fixing poor radio signal quality and reception.

Resolving problems related to audible door chimes not functioning.