Dapper Dark is your ally from the dark side. This all-in-one
monster has everything you need. Please look over this
manual to help you get the most out of Dapper Dark.
◆
MODULES (IN ORDER OF SIGNAL FLOW)
TUNER
First in line is a big, bright, fast and accurate tuner so you can play confidently in tune.
Hold the BOOST module ON/OFF switch to enable the TUNER.
When this module is activated, Dapper Dark will be MUTED; tap any footswitch to
deactivate this module.
The note name appears on the screen (the dot on the bottom right of the screen
stands for “sharp”), and the pitch accuracy is indicated by the LEDs.
◆
CONNECTIONS
Getting started with Dapper Dark is easy!
Plug your guitar cable into the INPUT jack
and run another cable from the OUTPUT jack
to your amp/mixer/computer interface.
Here's how to use the I/O panel:
OWNER’S MANUAL
Pitch flat
In tune
Pitch sharp
Current note name
Sharp (”#”) symbol
◆
SIGNAL PATH
BOOST
INPUT
HIGAIN
CHORUS
FX LOOP
HOLD FOOTSWITCHBOOST
TUNER(MUTETUNING)
DELAY
AMPMIXER
CAB SIM ON CAB SIM OFF
To Next Page
Need help?
General
