EasyManua.ls Logo

Valley Comfort Systems MP80 User Manual

Valley Comfort Systems MP80
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OM-MP80 E V1.15 January 29, 2015
MP80
SOLID FUEL WOOD FURNACE
For use as an add-on to electric, gas, or oil
furnaces or and independent wood furnace
when equipped with a blower.
Pour la version française de nos manuels S.V.P. vous référez à notre site web: www.blazeking.com
Manufactured By
Valley Comfort Systems Inc., 1290 Commercial Way, Penticton, BC, V2A 3H5, Canada
Phone: 250-493-7444 Fax: 250-493-5833 www.blazeking.com info@blazeking.com
OPERATION & INSTALLATION MANUAL
Installer: Please complete the details on the back cover and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.
SAFETY INFORMATION
IF THE INFORMATION IN THESE INSTRUCTIONS ARE NOT FOLLOWED
EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY
DAMAGE, PERSONAL INJURY OR DEATH. PLEASE READ ENTIRE
MANUAL BEFORE YOU INSTALL AND USE YOUR HEATER.
INSTALLATION IS TO BE PERFORMED BY A QUALIFIED INSTALLER
This furnace can be very hot when burning.
Combustible materials, including re wood, must not be stored within the furnace
installation clearances or within the space required for fueling, ash removal, and
other routine maintenance operations.
Children and pets must be kept from touching the heater when it is hot.
The chimney must be sound and free of cracks. Before installing this unit,
contact the local building or re or other authority having jurisdiction and follow
their guidelines.
Operate only with the doors tightly closed.
Do not use an elevated grate or otherwise raise the re.
This furnace is designed to burn natural wood only. Higher ef ciencies and
lower emissions generally result when burning air dried seasoned hardwoods, as
compared to softwoods or to green or freshly cut hardwoods.
Do not start a re with chemicals or uids such as gasoline, engine oil, etc.
Do not burn treated wood, coal, charcoal, coloured paper, cardboard, solvents or
garbage.
Do not let the furnace become hot enough for any part to glow red.
Comply with all local codes and regulations.
Never operate a furnace that has been improperly installed.
Never operate the furnace unless you are sure the smoke pipe and chimney
are in safe condition. Flue gasses may contain carbon monoxide which is
poisonous.
Keep smoke pipe and chimney clean to prevent a chimney re. Inspect and
clean ues and chimney regularly. In the event of a chimney re turn down all
thermostats and close off combustion air. Call a re department if necessary.
Have a clearly understood plan to handle a chimney re.
CAUTION:
CLEANOUT OF THE HEAT EXCHANGER, FLUE PIPE, CHIMNEY, AND
DRAFT INDUCER IF USED, IS ESPECIALLY IMPORTANT AT THE END
OF THE HEATING SEASON TO MINIMIZE CORROSION DURING THE
SUMMER MONTHS, CAUSED BY ACCUMULATED ASH.

Other manuals for Valley Comfort Systems MP80

Question and Answer IconNeed help?

Do you have a question about the Valley Comfort Systems MP80 and is the answer not in the manual?

Valley Comfort Systems MP80 Specifications

General IconGeneral
Fuel TypeNatural Gas or Propane
AFUE80%
Ventilation TypeInduced Draft
Ignition TypeDirect Spark Ignition
Weight120 lbs
Input BTU80, 000 BTU/h
Blower Motor TypePSC
Heating Capacity64, 000 BTU/hr

Summary

Safety Information

General Warnings

Crucial safety warnings for installation and operation.

Introduction

Operational Warnings

Key warnings related to appliance operation, burns, and child safety.

Specifications

Safety Precautions

Installation Instructions

Installer Responsibilities

Duties and obligations of the qualified installer.

Clearances to Combustibles

Minimum required distances from combustible materials for safe installation.

Flue and Chimney Requirements

Specifications and guidelines for flue and chimney installation.

Combustion Air Requirements

Ensuring adequate airflow for proper combustion within the appliance.

Add-on to Electric Furnace

Specific considerations for connecting the MP80 to an electric furnace.

Electrical Connections (Wood/Electric)

Wiring diagram for connecting the MP80 to a wood/electric furnace.

Add-on to Gas Furnace

Guidance for integrating the MP80 with a gas furnace.

Add-on to Oil Furnace

Specifics for connecting the MP80 to an oil furnace, including chimney notes.

Electrical Connections (Wood/Gas/Oil)

Wiring diagram for connecting the MP80 to gas or oil furnaces.

Independent Wood Furnace Installation

Electrical connections for using the MP80 as a standalone wood furnace.

Stand Alone Installation

Operating Instructions

Maintenance

Run-away or Chimney Fire Procedures

Steps to take in case of a runaway fire or chimney fire.

Replacement Parts

Warranty

Installer Notes

Related product manuals