Valley-Dynamo Dynamo ARCTIC WIND User Manual (English)

To Next Page

Order replacement parts at www.valleydynamoparts.com

ASSEMBLY INSTRUCTIONS

Accessory Pack Contents

• LEG BOLT (⅜-16 x 6” Carriage Bolt) part # ni870010421 4

• NUT (⅜-16 Hex Nut) part # ni20300900 4

• WASHER (½” ID Fender Washer) part # ni20401080 12

(additional leg bolts, nuts and washers secure the legs to the table for shipment and are not part of the hardware pack)

• SMALL PUCK – Fluorescent part # 860400255 1

• SMALL PUCK – Soft White part # 860400270 1

• SCORE POST ASSEMBLY 1

• #8 x 1½ ” FLAT HD PH BLACK SCREWS part # ni20100215 4

• #8 x ⅝ BLACK TRUSS HEAD SCREWS part # ni870003204 12

• SANDPAPER part # 980400200 2

• LEG BOOT part # 20701070 4

• LEG SHIMS 10

• MALLET part # 860400210 2

Tools Required

• PHILLIPS SCREWDRIVER

• 9/16” BOX-END OR SOCKET WRENCH

• ALL-PURPOSE CLEANER

(Fantastik, Formula 409, Windex or equivalent)

• RUBBING ALCOHOL

• CLEAN CLOTH

Need help?

Do you have a question about the Valley-Dynamo Dynamo ARCTIC WIND and is the answer not in the manual?

Valley-Dynamo Dynamo ARCTIC WIND Specifications

General

Lists all parts included in the accessory pack for assembly.

Lists the necessary tools for assembling the air hockey table.

Instructions for cleaning the playfield using rubbing alcohol.

Guidance on using sandpaper to maintain puck and mallet surfaces.