VALLEY FORGE & BOLT SPC4 600A - User Manual

Revision 1.1
User's Manual
SPC4
TM
Model 600A Electronic Load Data Logger System
- Firmware Version 1.50 -
VALLEY FORGE & BOLT MANUFACTURING COMPANY
4410 W. Jefferson St. •
••
• Phoenix, AZ 85043 •
••
• USA
Phone: (602) 269 – 5748 •
••
• Fax: (602) 269 – 7851 •
••
• E-mail: sales@vfbolts.com

Summary

2.0 Operation and Measurement

2.1 Warning

Critical safety information and handling precautions for system use.

2.2 Precautions

2.3 ABT-DAQ Software Installation

2.4 Hand-held Unit (HHU) Setup

2.5 System Calibration Check

Procedures to verify the system's calibration accuracy.

2.7 Checking the Tightness of a Joint

Method for measuring and verifying fastener tightness.

2.8 Recording Data in the Field

Steps for capturing load readings at the job site.

2.9 Downloading Recorded Data to a PC

Process for transferring recorded data from HHU to a computer.

4.0 User Maintenance - Recommended Cleaning Procedures

4.1 Cleaning the Probe and the Datum Disks

Procedures for cleaning critical measurement surfaces.

4.3 In Case of Difficulties

VALLEY FORGE & BOLT SPC4 600A Specifications

General

Brand	VALLEY FORGE & BOLT
Model	SPC4 600A
Category	Data Loggers
Language	English