Need help?Do you have a question about the Valley VRI-iS and is the answer not in the manual?
General| Brand | Valley |
|---|---|
| Model | VRI-iS |
| Category | Irrigation System |
| Language | English |
Manual illustrates proper installation of Variable Rate Irrigation Individual Sprinkler (VRI-iS) Option.
Lists required tools for installation, including screwdrivers, wrenches, pliers, and a laptop.
Emphasizes reading and understanding safety messages and signs for safe operation of irrigation equipment.
Explains hazard symbols (DANGER, WARNING, CAUTION) and information messages (NOTE).
Details requirements for PPE when working with electrical hazards and near energized parts.
Advises on handling conductive materials to prevent contact with energized power lines.
Outlines procedures for identifying and mitigating fall hazards during work tasks.
Identifies minimum working clearance distances required around electrical equipment.
Defines requirements for personnel authorized to work on de-energized electric circuit parts.
Provides guidelines for marking irrigation equipment near airports and crop dusting operations.
Details dangers and clearance requirements when working near overhead power lines.
Establishes minimum requirements for locking out energy isolating devices during maintenance.
Instructs to shut off and lock out all power sources before performing installation steps.
Details steps for installing the power supply and communication board onto the din rail.
Provides instructions for removing the collector ring cover and components.
Identifies sensor brackets and details attaching terminal blocks and sensor brackets.
Details attaching mounting brackets to the ring stack for Aeromotive and Insul-8 collector rings.
Guides on installing cord connectors and routing wiring for systems with or without running lights.
Provides instructions for wiring the collector ring based on the presence of a running light.
Instructs on temporarily installing the GPS tower box to set the pivot point GPS position.
Guides on turning on the power service disconnect and control panel main disconnect switch.
Instructs to verify and upgrade control panel software versions to the latest available.
Details steps to obtain and update the ICON user interface and Smart Relay Board software.
Guides on setting up the control panel for use with the GPS Pivot Position Option.
Details disconnecting all power and removing the GPS position tower box.
Guides on installing sprinkler valves, with or without a pressure switch.
Provides instructions for connecting cables between the collector ring, valves, and tower boxes.
Details mounting and connecting power supply tower boxes using bracket or span pipe methods.
Guides on mounting and connecting the GPS position tower box to valves and other components.
Lists prerequisites for VRI-iS setup: verifying GPS, determining flow rate, and max pressure.
Guides on configuring flow meter settings, including flow multiplier and low flow limit.
Details setting the maximum pressure for the pump system via the control panel.
Instructions on enabling or disabling the VRI-iS option after control panel setup.
Guides on setting VRI-iS constants like valve resync pressure, cycle times, and sprinkler spacing.
Details steps to test GPS position functionality, checking communication and tolerance lights.
Guides on configuring the VRI-iS network by initiating and verifying network configuration.
Instructs on testing valve operation using the sequence valves feature to verify functionality.
Guides on configuring flow meter settings, including flow multiplier and low flow limit.
Details setting the maximum pressure for the pump system via the control panel.
Instructions on enabling or disabling the VRI-iS option after control panel setup.
Guides on setting VRI-iS constants like valve resync pressure, cycle times, and sprinkler spacing.
Details steps to test GPS position functionality, checking communication and tolerance lights.
Guides on configuring the VRI-iS network by initiating and verifying network configuration.
Instructs on testing valve operation using the sequence valves feature to verify functionality.
Lists field install and wiring diagram documents for VRI-iS components.
Diagram showing components and connections for the VRI-iS control panel assembly.
Diagrams for Insul-8 and Aeromotive collector ring slip ring field installation.
Illustrates plumbing configurations for VRI-iS valves with and without a pressure switch.
Diagrams for PolySpan valve assemblies, with and without a pressure switch option.
Diagram showing the field installation of the VRI-iS power supply tower box.
Wiring schematic for the VRI-iS power supply tower box.
Diagram illustrating the field installation of the VRI-iS GPS position tower box.
Wiring schematic for the VRI-iS GPS position tower box.
Diagrams showing wiring for running lights on swing tower boxes and control panels.
Explains how the Smart Relay Board controls sprinklers and processes GPS data for VRI.
Lists system faults that can shut down the machine, their causes, and corrective actions.
Guides on how to view current system faults on ICON5/ICONX and ICON1/ICON10 control panels.
Lists VRI-iS and GPS related error codes, their descriptions, thresholds, and possible causes.
Continues listing error codes, including GPS coordinate range and VDC error reports.
Provides instructions for viewing system error codes on ICON control panels.
Lists RJ11 component IDs, error messages, and procedures for viewing and clearing RJ11 errors.
Guides on manually resynchronizing sprinkler valve duty cycles using the Resync Valves feature.
Details testing individual valve operation by turning them on and off for a specified duration.
Explains how to view on errors, off errors, and low power errors for sprinkler valves.
Guides on viewing communication errors for all sprinkler valves.
Describes how to display the duty cycle for each sprinkler zone on the map.
Instructions for changing zone settings, including angles, sprinklers, and duty cycles.
Guides on manually resynchronizing sprinkler valve duty cycles using the Resync Valves feature.
Details testing individual valve operation by turning them on and off for a specified duration.
Explains how to view on errors, off errors, and low power errors for sprinkler valves.
Describes how to display the duty cycle for each sprinkler in a managed zone on the map.
Instructions for changing zone settings, including angles, sprinklers, and duty cycles.
Details testing the continuity of fuses in the control panel and power supply tower box.
Guides on testing the power supply output voltage and troubleshooting power issues.
Provides pin-out information for VRI primary communications and dip switch settings.
Explains the meaning of LED indicators (Green, Red) on the VRI-iS sprinkler valve.
Details the pin assignments and colors for the VRI-iS cable.
Provides pin assignments and colors for the pressure sensor cable.
Explains how GPS position is determined and communicated within the irrigation system.
Discusses factors affecting GPS accuracy, including standard and DGPS services.
Lists factors that can degrade GPS signal and affect accuracy.
Details wire colors and their functions for the Garmin 19x GPS power data cable.
Guides on testing the GPS antenna using Valmont Terminal software and an antenna tester.
Details setting RJ11 communication protocol for VRI-iS and GPS position setup.
Guides on setting pivot point GPS position, distance to GPS, and runtime fallback position.
Details setting RJ11 communication protocol for VRI-iS and GPS position setup.
Guides on setting pivot point GPS position, distance to GPS, and runtime fallback position.
Provides a table to convert GPS angular degrees from minutes/seconds to decimal degrees.
Illustrates examples of converting angular degrees, minutes, and seconds into decimal degrees.
Provides tables to estimate drive unit speed based on motor output, tire size, and machine voltage.
Lists VRI-iS and Power Supply Tower Box components with corresponding page numbers.
Details the components included in the Tower Box Drive Unit Mount kit.
Lists parts for VRI-iS brass and plastic valves with 10 ft cables.
Lists parts for VRI-iS brass and plastic valves with 14 ft cables.
Lists parts for VRI-iS valves equipped with a pressure switch option.
Details components for the VRI-iS PolySpan valve assembly with a PSI switch.
Lists components for the standard VRI-iS PolySpan valve assembly.
Lists various VRI-iS cables, including 14 ft, 10 ft, and 3 ft options with adapters.
Details the VRI-iS panel and GPS tower box assembly and related kits.
Lists components for mounting tower boxes on pipes of various sizes.
Continues listing components for mounting tower boxes on pipes of various sizes.
Diagram showing components of the VRI-iS GPS Tower Box.
Lists all part numbers and descriptions for the VRI-iS GPS Tower Box assembly.
Diagram showing components of the VRI-iS Power Supply Tower Box.
Lists all part numbers and descriptions for the VRI-iS Power Supply Tower Box assembly.
Diagrams showing components for Insul-8 and Aeromotive collector ring slip rings.
Lists all part numbers and descriptions for VRI-iS slip ring components.
Details VRI-iS panel and GPS hardware components and related manuals.
Lists components for the Primary Communication Board, including terminal blocks and power supply.
To Next Page