Need help?Do you have a question about the VALMETAL H Series and is the answer not in the manual?
Procedure for submitting warranty claims for the equipment.
Valmetal's liability and warranty exclusions.
Purchaser acknowledges training and manual reliance.
Checklist for routine machine inspections.
Explains the safety alert symbol and its meaning.
Fundamental safety rules for operation and maintenance.
Essential safety precautions during machine operation.
Safety procedures during maintenance tasks.
Safety guidelines for working with the hydraulic system.
Safe practices when transporting the equipment.
Guidelines for safely storing the machine.
Safety information for tire mounting and maintenance.
Importance and location of safety decals.
Record of personnel training and understanding.
Welcome and overview for new users.
Identifies and describes main parts of the grinder.
Recommended procedures for initial use and checks.
Checklist for safe operation before starting.
Requirements for matching grinder with tractor.
Function and location of controls.
Guide for connecting and disconnecting.
Instructions for safe and efficient operation.
Procedures and safety for transporting.
Instructions for machine storage.
Types of fluids and lubricants required.
Details greasing procedures and points.
Recommended service schedule.
Log to track maintenance performed.
Guide for replacing worn or damaged knives.
Adjusting and maintaining belts and chains.
Procedures for checking and changing gearbox oil.
How to clean the breather.
Information on clutch and shear pin maintenance.
Lists the mechanical specifications and dimensions.
Torque specs for bolts and fasteners.
Torque values for hydraulic fittings.
Diagram of the hydraulic system.
To Next Page
General