Valor 802 User Manual

5
Figure 5
Method D – With 75mm Wall Spacer Kit (Supplied with Model 802 Fyrside, optional extra
with other appliances)
The wall kit should be securely fixed to the wall using the screws provided. The heater must then
be fixed to the wall kit. (See following section –Wall spacer kit installation)
If fixing through marble, ensure that both rawlplug and screw pass freely through the marble.
Secondary Screw fixing
If felt beneficial, the appliance can be additionally secured by screws through the side flanges – see
figure 5.
Wall Spacer kit installation

Valor 802 Specifications

General

Brand	Valor
Model	802
Category	Electric Heater
Language	English