Valor 802 User Manual

INSTALLATION AND OPERATING GUIDE
For
Electric Heaters
Model 801
With
Adorn, Icon, Visage, Elegant or Ultimate Fireslide fronts
&
Model 802
Ultimate, Cosyflame, Fyrside, Nebula & Pizzazz versions
600B599/06
This guide is intended to help you install and care for
your Valor electric heater. Please read carefully before
installing and using your heater.
Important
Please keep your Guide in a safe place for future
reference

Valor 802 Specifications

General

Brand	Valor
Model	802
Category	Electric Heater
Language	English

Summary

Important Safety Instructions

Safety Guidelines: Always and Never

Essential safety rules for operating and maintaining the heater, covering installation, usage, and precautions.

Installation Procedures

General Installation Requirements

Ensuring secure fixing, accessible socket, and proper earthing for safe operation.

Appliance Fixing Methods

Details on screw fixing, wire fixing, and using a 20mm wall spacer for securing the heater.

Wall Spacer Kit Installation

75mm and 20mm Spacer Installation Steps

Assembly of Fronts

Pre-Operation Checks and Fuel Effects

Flame Effect Drum Check

Operating the Heater

Model 802 Switch Operation

Explanation of the three switches for controlling heat settings and fuel effect on Model 802.

Model 801 Controls Explained

Details on the slider, lamp dimmer, and room thermostat for controlling Model 801.

Slider Control Operation (Model 801)

Slider Positions and Functions

Maintaining Your Fire

Lamp Replacement Guide

Instructions for replacing lamps in different heater models, including specific lamp types.

Automatic Cut Out and Care

Fault Finding

Troubleshooting common issues like no light, no heat, or low light from the fuel effect.