Pairing
1.
Click Pair
in
screen to have the unit prepare starting pairing.
It will display "Waiting for Pairing"
in
screen.
2.
Enable your cellular phone's bluetooth pairing. If the cellular phone requires
the pin code, enter 1 2
34.
3.
It will display "Pair OK " on screen when the paring is completed.
*
In
case
of
failure
of
pairing
- Delete item
in
paired list on your Bluetooth cellular phone
- Reset both cellular phone and this unit by switching on/off
- Restart pairing as per previous procedures.
* Should your cellular phone battery be at low charge, the Bluetooth connection
may occasionally be lost.
To
maintain good connectivity ensure that your
cellular phone battery is adequately charged.
Disconnect
To
disconnect Bluetooth link, just click DISCONNECT
in
screen.
Make a Call
(unavailable if pass-word stored
in
the cellular phone)
1.
Enter phone numbers
in
Dial Pad
in
screen or by using remote control.
-
+-
in
screen means erasing a number just entered.
2.
Press Pick Up
in
screen or 0 button(26)
in
remote control for calling.
3.
Talk through the supplied microphone.
3.
Press Hang Up
in
screen or e button(27)
in
remote control to hang up the
call displaying "Call End"
in
screen.
Receive a Call
1.
When the unit
is
ringing, "Answer?" appears
in
screen.
Press Pick Up
in
screen or
~
button(26)
in
remote control for calling.
- If ringing
in
other mode sucKas DVD, Radio, ... this unit automatically change
into Bluetooth mode. After phone talking, it also resume back to the previous
mode after 5 seconds delay time as below image.
- Even though making a call by cellular phone, not by this unit, this unit would
activate automatically, showing "Talking"
in
screen.
2.
Talk through the supplied microphone.
3.
After finishing conversation, press Hang Up
in
screen or ® button(27)
in
remote control to hang
up
the call displaying "Call End"
in
screen.
36
To Next Page
Loading...
Need help?
General