To Next PageTo Next Page
Need help?Do you have a question about the Valor Madrona MF28EN and is the answer not in the manual?
Crucial safety warnings about fire/explosion hazards if instructions are not followed.
Step-by-step instructions on what to do in case of a gas leak.
Guidelines for safe use, clearances, temperature hazards, and general operational safety.
Requirements for proper venting installation and system integrity.
Guidelines for handling, operating, and cleaning the appliance's glass door safely.
Warning about chemicals known to cause cancer and reproductive harm in California.
Detailed requirements for CO detectors and vent signage in Massachusetts.
Certifications and standards the appliance meets for installation and use.
Technical data including gas type, input, pressure, and injector markings for different models.
Details on natural gas and propane usage, pressure, and connection types.
Overall measurements of the stove, including height, width, and depth.
Guidelines for installing the stove on different flooring materials.
Minimum distances required between the stove and corner walls.
Minimum distances required between the stove and walls.
Minimum distances required between the stove and mantels or shelves.
Minimum space requirements for installing the stove in an alcove.
Approved vent pipe materials, co-axial, co-linear options, and manufacturer compatibility.
Instructions for creating wall/ceiling openings for vent pipes, including sealing.
Diagrams and descriptions of through-wall venting without and with vertical rise.
Diagrams and descriptions of through-roof venting configurations.
How to read the chart for allowable vent configurations based on rise and run.
Requirement for grading horizontal vent pipe runs upwards in the direction of exhaust flow.
Minimum clearance distances for wall vent terminals from various building elements.
Minimum vertical vent height ("H") required based on roof pitch for termination.
Details of the three cartons containing the stove components and a warning about handling the engine.
Instructions for installing the optional circulating fan kit.
Considerations for routing the gas line, including shut-off valves and regulators.
Steps for removing the glass window and log pack for access.
Instructions for attaching the legs to the casting base and securing it.
Procedures for placing the engine onto the base and attaching the side casting panels.
Adjusting and securing the side panels and engine to the base.
How to connect and position the remote control receiver box.
Detailed steps for installing the circulating fan kit.
Information on the flame supervision device and general operating precautions.
Instructions for cleaning the glass, logs, and firebox, and performing regular checks.
Guidance on replacing batteries in the remote control handset and receiver.
Explanation of different modes (MAN, TEMP, TIMER) and how to adjust flame height and time.
How to turn the appliance off using the manual switch on the valve.
Critical safety checks and warnings to follow before attempting to light the appliance.
Step-by-step procedures for lighting the pilot flame using automatic or manual methods.
Instructions for shutting down the main burner and pilot flame via remote or manual switch.
Lists approved direct vent termination caps, adapters, and couplers from various manufacturers.
Details approved vent pipes, elbows, flashings, and other system parts by manufacturer.
Details on warranty periods for specific parts like casing, glass, and firebox.
Explains warranty terms, required registration, installation compliance, and exclusions.
Lists part numbers for the stove's exterior components like base, panels, and front.
Comprehensive list of internal engine components, their part numbers, and descriptions.
General