How to use all jets
• Hand Shower Position
When the position knob is placed in”b”.
When the position knob is placed in”a” .
When the position knob is placed in ”c”.
• Shower Head Position
• OFF Position
NOTE: Please rn on the Pressure Balancing Valve first.tu
- 10 -
When the Pressure Balancing Valve of knob is placed
in ”e”.
a
e
b
b
• Spray Position
c
c
When the position knob is placed in between each
dot mark, this will result in a sharing of water output
between 2 operating modes .This can be used if
combination of 2 modes is desired however the
water output will be reduced due to sharing of water
flowing through the system between those 2
operating modes.
Two modes simultaneously•
When the position knob is placed ”d”, the
handshower and the top hydro jets will work
simultaneously.
d
d
To Next Page
Loading...
