Valtra 115 - Page 22

20
Model Code Page
13. Maintenance
130 4
1. 11. 2000
95, 105, 115
X100-X120
Recommended fuel and lubricants (all capacities are incl. of filters)
Part of machine Valtra grade SAE grade API grade
Volume,
when chanĆ
ging (litre)
Engine, 4-cylinders:
-95, 105, 115, X100, X110, X120
Valtra
Engine
10W/30: -20°C...+30°C
15W-40: -10°C...+40°C
CE
CF/CF-4
13
Tractor's hydraulic system and
transmission
Valtra
Transmission
HT 60: -30°C...+30°C
HT 100: -10°C...+40°C
GL-4
(G2-98)
min 34, max 43
(105, 115,
J02316-:max
45),
extra max 50
(105, 115,
J02316-: extra
max 53).
95-X120 *):
min 45, max
55, extra max
65.
Industrial powered front axle:
-differential, 95-115 (Dana)
80W 90
GL 5 (LS)
8
-differential, X100-X120 (Carraro) Valtra Axle
80W
-
90
GL
-5
(LS)
6
-hub reduction gears 2x1,5
Fuel tank
Diesel fuel
135
F
ue
l
tan
k
Di
ese
l
f
ue
l
13
5
Engine cooling system
-95, 105 normal/with openable grill
water + anti freeze agent (standard ASTM D3306 86a or BS
15,5/19,5
-115
water + anti-freeze agent (standard ASTM D3306-86a or BS
6580:1985)
20,5
- X100
6580
:
1985)
17
- X110, X120 22
Brake fluid reservoir
Brake fluid SAE J1703
0,3
Clutch fluid reservoir (not HiTech)
B
ra
k
e
fl
u
id
SAE
J1
7
03
0,2
Windscreen washer Washer fluid 3
Auxiliary hydraulics oil tank Oil DIN 51524 (HVLP 32) 100
*) Chassis numbers, see page 450/6.
For HiTech transmission/hydraulics is not available suitable bio oil.
Biodiesel fuel
-In the Valmet engines it is accepted to use esterified rape oil as biodiesel fuel - or RME (rape oil esterified with methanol)
without technical modifications on the engine. The requirement for the acceptance is that the biodiesel that is used is very
pure and that it fills the Austria "Ö1190" biodieselnorm demands of pureness. Practically it means that the amount of pure
carbon, hydrogen and oxygen content together in the biodiesel is more than 99 %.
-In the service instructions there is one change: checking cleaning of nozzles every 1000 hours.
'
80W/90
0 +10 +20 +30-10-20-30
10W/30
HT60
15W/40 HT100
+40
Viscosity classes according to ambient temperature
-30
° C ° C ° C ° C ° C ° C ° C ° C