EasyManua.ls Logo

Valtra A75n User Manual

Valtra A75n
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator’s manual
A75n, A85n, A95n
A75L,A85L, A95L
Question and Answer IconNeed help?

Do you have a question about the Valtra A75n and is the answer not in the manual?

Valtra A75n Specifications

General IconGeneral
Engine Power75 hp
Engine TypeAGCO Power 33 AWI
Number of cylinders / capacity3 / 3.3 l
Max. speed40 km/h
Hydraulic SystemOpen center
Weight3300 kg
Fuel Tank Capacity75 l
Cylinders3
Displacement3.3 l
EngineAGCO Power
Rated engine power, kW (hp)55 kW (75 hp)

Summary

To the Operator

B. Safety Precautions

B1. Safety Rules

Summarizes regulations for safe tractor operation, traffic safety, and occupational health.

B1.1 Roll Over Protective Structures

Details on ROPS, seat belts, operation, damage, and sun protection roof for safety.

C. General Description

C1. Illustrations Valtra A75n-A95n, A75L-A95L

Visual overview of Valtra A75n-A95n and A75L-A95L tractor models, highlighting exterior features.

C2. Service

C2.1 Cost-Free Service

Details on the initial cost-free service inspection provided after 100 hours of operation.

C3. Engine

C4. Power Transmission

C4.1 Clutch

Explanation of the twin clutch system for propulsion and power take-off operation.

C4.2 Gearbox

Details the speed gearbox, its four synchronized gears, shuttle unit, and 12 forward/12 reverse speeds.

C4.3 Rear Axle

Describes the rear axle, differential lock, and final drives of planetary gear type.

C4.4 Power Shuttle

Explains the synchronized shuttle unit for forward-reverse changes, operated by a lever.

C4.5 Powered Front Axle

Details the front axle drive, automatic differential brake, and electro-hydraulic engagement.

C4.6 Power Take-Off

Describes the independent power take-off, its clutch, and speed selection options.

C5. Brake System

C6. Steering System

C7. Hydraulic System

C7.1 Hydraulic Lifts

Details on hydraulic three-point linkage and electro-hydraulic linkage systems.

C7.1.3 Front Linkage

Information regarding front linkage as optional equipment.

C7.2 Valves for Auxiliary Hydraulics

Description of standard and optional auxiliary hydraulic valves and couplings.

Related product manuals