EasyManuals Logo

Valtra A95 User Manual

Valtra A95
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
13
Model Code Page
12. Maintenance
205-- 900
120 1
1. 1. 1998
1. 5. 1996
Maintenance 205---900
Note! Detailed maintenance procedures are given in the
Operator”s Manual.
When servicing:
--- Always stop the engine before doing any servicing work.
--- Apply the parking brake to ensure the tractor cannot move.
If the ground is uneven the wheels should be scotched
--- Always observe the utmost cleanliness in all maintenance
work.
---Thoroughly wipe off filler caps and plugs as well as sur-
rounding parts of the tractor before filling up with fuel or oil.
--- Inspect the oil and filters when changing. Large amountsof
dirt (e.g. heavily clogged filters) can point to a fault which
could cause extensive and costly repairs if not corrected in
time.
--- When carrying out checks the tractor should stand on level
ground.
--- Levels should be checked in the morning when the oil is
cold and has had time to run down to the bottom of the unit
concerned.
--- When changing the oil, bear in mind that the oil can be very
hot when it drains from the tractor. Waste oil and oil filters
should be handled carefully and disposed of properly.
--- After completion of the service work always replace all
safety covers etc.
Lubrication of points provided with grease
nipples
--- Always clean the grease nipples before applying the
grease gun.
--- Pump in grease to the nipples until clean grease is
squeezed out (unless otherwise instructed).
--- Wipe off all surplus grease which has been squeezed out
at the lubricating points.
--- Preferably carry out lubrication with bearing points and
joints unloaded and with the bearings in different position (
e.g. lubricate the steering knucklebearing onthe steeringaxle
with the wheels at both full left and right lock and with the front
axle lifted up).
Lubrication and maintenance schedule
All intervals are counted from zero on the hour recorder. For
example, 1000---hour service is carried out every 1000 and
2000 hours according to the hour recorder (yearly or every
other year) even if the operates have been c arried out at the
guarantee service.
Example:
The 1000---hour service includes all operates listed under
daily/every 10 hours,weekly/every 50 hours,250, 500 and
1000 hours.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valtra A95 and is the answer not in the manual?

Valtra A95 Specifications

General IconGeneral
Engine Power95 hp
Engine Cylinders4
Displacement4.4 liters
Hydraulic SystemOpen center
PTO Speed540/1000 rpm
Rated Engine Power95 hp
CabAvailable with or without cab

Related product manuals