EasyManua.ls Logo

Valueline SVL-SETDVR30 - User Manual

Valueline SVL-SETDVR30
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SVL-SETDVR30/40
SVL-DVR104
SVL-CAM110
MANUAL
Question and Answer IconNeed help?

Do you have a question about the Valueline SVL-SETDVR30 and is the answer not in the manual?

Summary

Safety Precautions

Electrical Safety

Covers power sources, overloading, grounding, and lightning precautions.

Environmental Safety

Addresses water/moisture, heat sources, dusty fields, and ventilation.

Operational Safety

Includes handling objects, liquids, cleaning, moving, and attachments.

Battery and Accessory Safety

Covers correct batteries and unstable accessories.

DVR Connection

HDD Installation Procedure

Step-by-step guide for installing the hard drive into the DVR.

Camera and Monitor Connection

Instructions for connecting cameras and monitors to the DVR.

Power Supply Connection

Guidance on connecting the DVR to the power supply.

DVR Menu

Record Parameters Configuration

Configure channel, record status, pack duration, and pre-record settings.

Recording Schedule Setup

Set up weekly recording schedules for different event types.

Record Search Function

Search for recorded files by channel, date, and time.

Event Search Function

Search for events based on date, time, channel, and record mode.

File Backup Procedures

Procedures for backing up record files based on event or time.

Network Settings Configuration

Configure network type, IP address, ports, and UPnP.

Static Network Configuration

Detailed setup for static IP, subnet mask, gateway, and DNS.

PPPoE Network Configuration

Setup for PPPoE connection, including user name and password.

Router Port Forwarding Steps

Steps for configuring port forwarding on a router for remote access.

Motion Detection Setup

Configure motion detection sensitivity, area, and alarm actions.

Alarm Settings Configuration

Configure general alarm settings like I/O status, buzzer, and full-screen alarm.

HDD Management and Formatting

Check HDD status, format, and set overwrite settings.

PTZ Configuration Settings

Set up PTZ camera protocol, baud rate, and address.

System General Settings

Configure date, time, language, video format, and DST/NTP.

User Management Configuration

Add, edit, and manage user accounts and their permissions.

Load Default Settings

Restore system to factory default parameters.

Event Configuration

Configure abnormal event types, buzzer, and alarm messages.

Web Application Manager

ActiveX Control Installation

Guide for downloading and installing the ActiveX control for web access.

Web Application Manager Login

Steps to log into the web interface using user credentials.

Network Parameters via Web

Setting network type, IP address, and ports via web.

Alarm Settings via Web

Configuring motion and I/O alarm settings via web.

System Update Procedure

Steps to upgrade the DVR system firmware remotely.

Appendix

Troubleshooting Common Issues

Answers to frequently asked questions about system problems.

Mobile Device Support

Valueline SVL-SETDVR30 Specifications

General IconGeneral
TypeDVR
Channels4
Video CompressionH.264
Motion DetectionYes
Audio OutputYes
Recording Resolution720p
Remote ViewingYes