Why is my vamvo MLP-110 failing to connect to the network?
If your Vamvo Projector fails to connect to the network, ensure that Wi-Fi is enabled. Also, verify that you've entered the correct password. If the problem persists, try restarting your router.
What to do if my vamvo MLP-110 Projector has Wi-Fi connection but no internet?
If your Vamvo Projector connects to Wi-Fi but has no internet, first verify that your network is working correctly and that other devices can access the internet via Wi-Fi. If other devices are working, try restarting your router and then restarting the projector.
How to fix a power failure on my Vamvo Projector?
If your Vamvo Projector experiences a power failure, check whether the power cord is properly plugged in and whether the power switch is turned on.
Identifies and describes the main physical components of the projector.
Details the buttons and functions available on the remote control.
Instructions on how to connect the power and turn on the projector.
Guides on adjusting the projection to correct distortion.
Explains how to use the focusing wheel for a clear picture.
Explains how to select the input signal source for the projector.
Details connecting devices using the AV (3-in-1) video cable.
Guides on connecting devices via the HDMI port.
Describes connecting audio output devices like earphones.
Mentions the device's capability to charge mobile phones via 5V output.
General| Contrast Ratio | 3000:1 |
|---|---|
| Lamp Life | 50, 000 hours |
| Aspect Ratio | 16:9 |
| Keystone Correction | ±15° |
| Display Technology | LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Connectivity | HDMI, USB, VGA, AV |
To Next Page