Need help?Do you have a question about the Vanco Beale Street Audio BAV4250 and is the answer not in the manual?
General| Amplifier Class | Class D |
|---|---|
| Channels | 4 |
| RMS Power per Channel (4 Ohms) | 250W |
| RMS Power per Channel (8 Ohms) | 150W |
| Bridged Power (8 Ohms) | 500W |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion (THD) | <0.05% |
| Signal-to-Noise Ratio (SNR) | >100dB |
| Input Impedance | 20k Ohms |
| Gain | 32dB |
| Power Supply | 100-240V AC, 50/60Hz |
| Protection Circuits | Short Circuit, Thermal |
To Next Page