Need help?Do you have a question about the Vanderbilt ACTpro-1500 and is the answer not in the manual?
General| Model | ACTpro-1500 |
|---|---|
| Type | IP Access Controller |
| Connectivity | Ethernet |
| Number of Doors | 1 |
| Number of Readers | 2 |
| Relay Outputs | 2 |
| Operating Temperature | -20°C to +60°C |
| Users | Up to 10, 000 |
| Events | Up to 50, 000 |
| Communication | TCP/IP |
| Inputs | 4 |
| Power Supply | 12-24 VDC |
| Input Voltage | 12 to 24 VDC |
| Reader Technology | Wiegand, OSDP |
| Communication Interface | Ethernet, RS485 |
| Humidity | 0% to 95% (non-condensing) |
| Weight | 200g |
| Certifications | CE |
| Outputs | 2 |
Details on connecting the external 12V DC or 24V DC power supply to the controller.
Instructions for connecting Clock&Data interface readers to the controller.
Guidance on connecting Wiegand interface readers for entry and exit.
Details on connecting OSDP protocol readers and OSDP-bus configuration.
Procedure to reset the ACTpro controller to factory settings using DIP switch 2.
Configuring DHCP or static IP addressing using DIP switch 1.
Steps to resolve inability to connect to the ACTpro-1500 controller via network.
To Next Page