Vanguard System VM-5500 User Manual

VM-5500 Operator’s Manual
2018
26
Optional Setup | Rev 0418.1
3.3 User Interface Setup
3.3.1 Alarm Setup
In this screen you may set the volume of the Alarm or Turn the Sound Off for all. In the Disables tab you
can change the Enable state of each accessory sensors.
Figure 23 Alarm Setup
Press “Next Page” to navigate to the Display Settings page.
3.3.2 Display Settings
The Display setup is where the screen brightness and Day/Night Mode are set. Conversion units may be
set to English or Metric.
Figure 24 Display Settings
Press “Next Page” to navigate to the Misc. Settings page.

Vanguard System VM-5500 Specifications

General

Brand	Vanguard System
Model	VM-5500
Category	Monitor
Language	English