VANITY PLANET Aera - Instructions; Before Using Aera

8
Instructions
Warning: To avoid risk of burns or injury, make sure to only adjust the
nozzle when the device is off.
BEFORE USING AERA
Only ll Aera with distilled water. Tap water can cause the
buildup of limescale in the device and shorten its lifespan.
Also, don’t use any oils, herbs, etc. instead of water.
• First, remove the tank and unscrew the plug.
• Then, slowly and carefully pour the distilled water into the
tank until it reaches the “Min.” level but no higher than the
“Full” mark. At the “Full” mark, there will be enough water
for one, 15-minute session. Once lled, close the water
tank and fasten the plug.
• Last, insert the water tank back into Aera until it
clicks into place.
• Wash your face before using Aera. This will make the
detoxifying session even more effective.
• Then, adjust the nozzle to the height you’d like.
• For a full spa experience, soak the basket’s foam portion
with your favorite essential oil and place it on the device’s
nozzle. (There are three baskets included to prevent the
mixing of oils).