1. Only add distilled or pure water to the tank. Do
not add any other liquids.
2. When adding water, it is necessary to turn off the
power switch, unplug the power source and then
add water to the water tank.
3. When using hot mode, high-temperature steam
will be sprayed. Please adjust the distance
between the face and the nozzle (about 25cm)
according to the degree of heat sensitivity to
avoid scalding the skin.
4. When the machine is in use, use caution to
prevent the danger of scalding with hot steam.
5. Do not soak the unit, power supply or
plug in water.
6. Please use the correct supply voltage of
120V/60Hz.
7. Do not add detergent or other chemical solvents
into the water tank.
8. Keep the power cord away from hot surfaces
and water.
Maintenance
14
To Next Page
Loading...
