VANMOOF S3 - Check Your Handlebar

15
BUILD YOUR BIKE
Tighten using
Allen key #6
Screw
Allen key #5
Engraved ‘R’
9.4 Identify the right pedal – Looking down
from a riders position it’s attached to
the right side of the bike and has an
engraved ‘R’.
9.5 Screw onto the right crank by hand in
a clockwise direction.
9.6 Tighten the pedal using Allen key #6.
10.1 Hold the front wheel between your
knees and try to rotate the handlebar.
If you can feel any play, use Allen key
#5 to secure the handlebar.
10. Check your handlebar