Need help?Do you have a question about the Vanner LIFESTAR 20-1050CUL-DC and is the answer not in the manual?
General| Brand | Vanner |
|---|---|
| Model | LIFESTAR 20-1050CUL-DC |
| Category | Power Supply |
| Language | English |
Converts battery power to 120 VAC modified sine wave for vehicle equipment.
Describes multi-stage charging modes: Bulk Absorption and Ready/Maintenance.
Details the portable equipment charging circuit and its protection.
Guides on setting up +12V and Ground remote control signals.
Inspect shipping container and equipment for damage upon arrival.
Guides through selecting location, routing DC cables, installing fuses, and bonding.
Explains Steady/Single/Double Blink Green lights for inverter status.
Explains Red/Yellow/Green lights for battery, temp, overload, charger status.
Guides through selecting location, routing cable, and securing panels.
Step-by-step guide to installing, starting, applying loads, and using shore power.
Addresses common issues like blinking LEDs, no ON lamp, AC load not running, battery low.
To Next Page