Specifications…
Power: 115 VAC 50 or 60 Hz
INPUTS Sensor: 12 VDC current sinking (open
collector)
DC Output: 24 VDC, 1.5 amp total
Outputs
Power for Sensor(s): 12 VDC, 0.250 amp total
Enclosure: 8” wide x 10” high x 4” deep
DIMENSIONS:
Mounting Holes (4): 7” x 10.625,” 0.025 dia
Weight: approximately 11 pounds
PRO SERIES DIGI-TRACK
RESPONSE TIME:
From TRIGGER SIGNAL to start of PATTERN
CYCLE: Less than 1 millisecond
TOTAL RESPONSE TIME
PRO SERIES DIGI-TRACK response time plus
INPUT DEVICE response time
OUTPUT RESOLUTION:
+/- 0.1 inch from programmed START and STOP
settings
PATTERN RESOLUTION:
0.1 inch
MAXIMUM PATTERN
LENGTH:
99.9 inches
MAXIMUM OFFSET:
99.9 inches
STITCH ON/OFF LENGTH:
24.9 inches (maximum)
FLOW:
0-100 scale, no dimensions
LOW SPEED CUT OFF
(LSCO):
0-250 ft/min, 1 ft/min resolution
ON-DELAY, OFF-DELAY:
(speed compensation)
0-50.00 ms, 0.25 ms resolution
VanSco
Products-The Gluing Equipment Innovators
2652 Lashbrook Avenue • South El Monte, CA 91733 • 626-448-7611 • Fax 626-448-0221
E-mail: sales@vansco.com • URL: www.vansco.com
To Next Page
Loading...