The Vansco PRO SERIES Digi-Track….
…is a microproc system. It can
be used in any process, which requires precise accurate pattern placement at varying product
IES DIGI-TRACK incorporates two independently programmable patterns, X and Y,
hich can be directed singly or in combination to two outputs, A and B. Thus, single line, multiple
RACK includes routines to store and retrieve four different programs. A
ariable low speed cut off (lsco) to prevent flooding on the machine shut-down, adjustable speed
attern X and Y which rapidly cycles the
utput signal on and off. The result is dots or short lines rather than a continuous long line.
with a
rotective cover which also prevents unauthorized adjustment and tampering. The operator interface
y
indow is moved to view program variables such as pattern lengths. When the desired information
tines or procedures are
the job fast! Prewired electrical quick
essor driven, speed-compensating, distance based, electronic control
,
speeds, but it was specifically developed to control the output from valves used in adhesive
application systems. Examples of applications where the PRO SERIES DIGI-TRACK could be used
include business forms, collating, labeling, cartooning, and bag making. There are many other
applications.
The PRO SER
w
line, and the familiar “Pattern-Skip-Pattern” applications can easily be accomplished. In addition to
single cycle operation, a repeat cycle operating mode is provided which continues pattern cycle
output as long as the trigger signal is active, and a no pattern cycle operating mode for continuos
applications is available.
The PRO SERIES DIGI-T
v
modulated fluid volume, and variable start and stop compensation for a wide range of electric valves
are all standard features. Routines for testing the inputs and outputs, configuring for installation and
setup, and an access code security system are also provided.
An operator selectable stitch may be superimposed on both p
o
All controls and displays, except the power switch, are mounted inside a rugged enclosure
p
includes a sealed membrane switch control panel and a twenty character, two line display window.
Data entry is “thumb-wheel switch” simple. Using direction buttons on the control panel, the displa
w
is displayed, new data can easily be entered using data keys if required.
Engineered to “hook up and run”, no confusing hidden set up rou
required to get the PRO SERIES DIGI-TRACK on
connects for the TRIGGER INPUT DEVICE, SPEED TRACKER, and SERVO (and optionally
available for the OUTPUTS) mean trouble free installation and reliable operation.
VanSco
Products-The Gluing Equipment Innovators
2652 Lashbrook Avenue • South El Monte, CA 91733 • 626-448-7611 • Fax 626-448-0221
E-mail: sales@vansco.com • URL: www.vansco.com
To Next Page
Loading...