Vansco VMM1615 User Manual

2 VMM1615
About the VMM1615
Outputs include:
 10 amp high-side
 5 amp high-side
 2.5 amp high-side
 2.5 amp low-side
 1 amp solid state relay
2 of the 5 amp and 2 of the 2.5 amp outputs also include accurate current sensing
for monitoring loads or for hydraulic control.
The VMM1615 has two CAN communication ports for communication with any
system module supporting the CAN 2.0B standard. The standard protocol
supported is SAE J1939, but others could be supported through custom software
development.
The VMM1615 follows the controller module road map, which provides
hardware that can be used with VMM software (as multiplex modules supporting
ladder logic programming).
This manual describes the hardware components of the VMM1615, but does not
explain how to write or configure the software. For more information about
software, refer to the appropriate software manual or contact your Parker Vansco
Account Representative.

Vansco VMM1615 Specifications

General

Brand	Vansco
Model	VMM1615
Category	Control Unit
Language	English