Operating manual Automatic
charger for lead-acid batteries 6 / 12V.
Model BC-612V.
Precautionary measures:
•
Before using the charger, read the instructions.
•
This charger is designed to charge only lead-acid batteries.
Attempts to charge other types of batteries can damage your device.
•
Do not expose the charger to moisture.
•
Unplug the charger from the mains when not in use.
•
Do not use extra cords are not recommended by the manufacturer,
together with the memory. Otherwise, it may result in fire, short circuit or
bodily injury.
•
Do not disassemble the charger by yourself, if it is exposed to short
circuit or been mechanically damaged. Contact a qualified
expert.
•
To clean the device, disconnect it from the mains, use a damp cloth,
Do not immerse in water.
•
Charger can be used with children under the supervision of adults or age 8letnego
with the proviso that it explained the potential risks and safe operation with the
principles
device. Cleaning the unit should be done only under the supervision of
adults.
Description and features:
•
Charging lead-acid batteries 6 / 12V all brands
•
Automatic detection of the charge voltage
•
Wide range of input voltage 100-240V
•
LED charging indicator
Specifications:
Input voltage
100-240V 50-60Hz
Output voltage
To Next Page
Need help?
General
