6 / 12V 800mA
tap battery
Rechargeable lead-
5-8Ach acid 6V, 12V 5-8Ach
Operation memory
1.
Connect the charger to the battery terminals: red to the positive (+) terminal,
black to the negative (-) battery terminal, - so that the terminals are not
contact with each other.
2.
Connect the charger to the mains.
3.
Charger automatically detects the voltage of the batteries and switches to the right
output voltage.
4.
LED displays charging mode:
Burning Red - Charging
Flashing red - Battery is fully charged and ready for use
The absence of a light signal - Battery is not connected to the charger or broken
connection polarity of terminals.
5.
6B, the battery charging time is approximately 6 5Ach hours 8Ach 12B - 12 hours.
6.
After the battery is charged, disconnect the charger from the mains and unplug
terminals of the battery (try not to pull the wire terminal).
To Previous Page
Loading...