Need help?Do you have a question about the Vantage Hearth FD5106 and is the answer not in the manual?
Details on IP24 rating, power supply, insulation class, and operating parameters.
Explains the die-cast aluminium body, thermodynamic fluid, and internal components.
Covers radiator covering, placement, child safety, and professional installation requirements.
Guidance on ideal placement, clearances, and wall mounting procedures.
Details on connection voltage, circuit breakers, differential protection, and grounding.
Specifies allowed installation areas (zones 2 & 3) and IPX4 protection in bathrooms.
Instructions for turning the radiator on and navigating control keys.
How to adjust temperature settings and understand the LED indicator.
Setting two distinct temperature levels (TH and TL) for different periods.
Setting daily schedules for Comfort (TH) and reduced (TL) temperatures via time periods.
Maintains temperature based on user-defined schedules.
Maintains programmed temperature during normal use.
Utilizes reduced temperature and anti-freeze settings for energy saving.
Puts the radiator in a low-power state.
Table listing all available modes, their symbols, and descriptions.
Safe procedures for cleaning the radiator body and controls.
Identifies common problems, possible causes, and recommended solutions.
Information on proper disposal of electrical appliances according to regulations.
Lists directives and harmonized regulations the product adheres to.
Details on warranty periods for the radiator body, fluid, and electronic components.
General| BTU Output | 26, 000 BTU |
|---|---|
| Vent Type | Direct Vent |
| Fuel Type | Gas |
| Heating Capacity | Up to 1, 000 sq ft |
| Ignition Type | Electronic |
To Next Page