Vantec CB-ISATAU2 User Manual

PRODUCT DESCRIPTION
The SATA/IDE-USB Adapter gives you the flexibility
of connecting almost any type of drive to your
computer via USB. SATA, 3.5” IDE, 5.25” IDE, and 2.5”
IDE drives are all supported and can be easily
hot-swapped to your system. The included exter-
nal power adapter will allow you to power your
drives outside your system giving you the ability to
quickly add or swap between drives without
opening your case. The SATA/IDE-USB adapter
incorporate 3 interfaces to one USB adapters.
MODEL:
CB-ISATAU2
SPECIFICATION
Interface: SATA to USB 2.0
3.5” & 5.25” IDE to USB 2.0
2.5” IDE to USB 2.0
Dimensions: 70 x 43 x 10 mm
Cable Length: 92cm (36in)
SYSTEM REQUIREMENTS
Intel Pentium II 350MHz-compatible or Apple G3 processor and greater
Microsoft Windows 98SE/ME/2000/XP or Mac OS 8.6 and greater
USB-equipped system
For USB 2.0 speeds, the system must support USB 2.0 specifications
CD Rom drive (if drivers are needed)
FEATURES
Transfer Rates Up to 12Mbps With USB 1.1
Transfer Rates Up to 480Mbps With USB 2.0
Easily add storage to any system with USB
Currently supports up to 500GB
Supports ATA/ATAPI-7
Supports LBA-48 Addressing
Hot-swappable: Plug and play without rebooting!
SATA / IDE TO USB 2.0 Adapter
SUPPORT 2.5”, 3.5” & 5.25” IDE/SATA DRIVE

Vantec CB-ISATAU2 Specifications

General

Interface	USB 2.0
SATA Support	SATA I/II
Transfer Speed	Up to 480 Mbps (USB 2.0)
Operating System Compatibility	Windows, Mac OS, Linux
Type	Adapter
Power Supply	External Power Adapter
Supported Drives	SATA HDD/SSD
Connectors	USB Type-A male, SATA 7-pin female

Summary

Product Description

Specifications

Interface

Specifies connection types: SATA to USB 2.0, 3.5" & 5.25" IDE to USB 2.0, 2.5" IDE to USB 2.0.

Dimensions

Adapter size is 70 x 43 x 10 mm.

Cable Length

The included cable measures 92cm (36 inches).

System Requirements