3
Notice
1. To ensure an uninterrupted use of the device, please connect it to the car charger
while recording to avoid sudden shutdown due to insufficient battery.
2. Please power the device with the car charger provided.
3. Make sure the camera lenses are clean and not blocked.
4. It is recommended that you perform a pre installation test to ensure the device is
in good condition.
5. DO NOT leave the product where the temperatures may exceed 70°C (160 °F) for
a long time to prolong its service life.
Packing List
Rubber Mounting Strap x 4
To Next Page
Loading...
