- 33 -
4.2.8 Automatic the Time via GPS
The GPS automatic calibrate time setting for the E2 dash cam is turned
on by default. If your location is Los Angeles, you can select GMT-08:00.
If you do not know the time zone of your location, you can use WIFI to
connect to the Vantrue App, and confirm that the automatic time
adjustment function in the App is turned on.
4.2.9 Wireless Remote Control
The camera is equipped with a remote control, which can be used to
quickly control the camera to snapshot, take event video, set audio
on/off and perform other functions.
Remote control connection:
Remove the insulating strip on the remote control, and the camera will
automatically match the remote control. No manual pairing with the
dash cam is required.
When the icon appears on the screen, it means that the remote
control has been successfully matched.
EN
EN
EN
EN
14:39:07 11-18-2022
00:00:37
MP/H
35
1440P+1440P 30FPS
To Next Page
Loading...
