Need help?Do you have a question about the Vantrue N4 Pro and is the answer not in the manual?
General| Storage | Supports up to 512GB Micro SD card (not included) |
|---|---|
| HDR | Yes |
| Loop Recording | Yes |
| GPS | Built-in |
| G-Sensor | Built-in |
| Parking Mode | Yes |
| Night Vision | Yes |
| Operating Temperature | -10°C to 70°C (-4°F to 158°F) |
| Wi-Fi | 2.4GHz |
| Power Source | Super Capacitor |
| Lens | Triple Lens (Front, Rear, Interior) |
Controls device power, emergency recording, snapshots, and file deletion.
Starts/pauses recording, confirms menu selections, and plays/pauses video playback.
Navigate menus, select options, adjust playback speed, and switch video windows.
Access device settings, Wi-Fi functions, and restart the camera.
Shows device status: solid green for standby/off, flashing green for active recording.
Explains video file name format: date, sequence, recording mode (N, P, T, S, E), and camera source (A, B, C).
Instructions for inserting and formatting the microSD card, including recommended specifications.
Guides routing of the power cable from the A-pillar to the cigarette lighter.
Provides instructions for organizing the rear camera cable from front to rear windshield.
Live view of dash cam footage with options for full-screen and multi-channel window display.
Review recorded video and photo files stored on the SD card within the application.
Download videos and pictures from the SD card to the mobile app's local folder.
Capture still images from the app's real-time preview interface.
Configure video resolution, loop recording, G-Sensor sensitivity, exposure, and other recording parameters.
Choose the user interface language from available options: English, French, Spanish, etc.
Set Wi-Fi mode (5G), auto-on behavior, and view network name/password.
Adjust voice command sensitivity (low, standard, high, off) and customize commands.
Set time/date via GPS auto-update or manual input, including DST and time zone.
Access critical event videos triggered by G-Sensor activity or manual locking.
View standard recordings: loop, parking, time-lapse, and private mode videos.
Browse and manage captured still image files.
Ensures continuous recording by overwriting older files when the memory card is full.
Captures and saves videos triggered by collisions, vibrations, or manual locking.
Monitors the vehicle in various scenarios using collision, motion, or low bitrate detection.
Configures detection zones for front/rear cameras to trigger recording upon movement.
Review recorded files directly on the dash cam using navigation buttons.
Connect the dash cam via USB to a computer to access and manage video files.
Manage dash cam files via Wi-Fi using the Vantrue Cam mobile application.
Download firmware from the VANTRUE website and copy to memory card for installation.
Update firmware wirelessly via the Vantrue Cam app using in-app notifications.
To Next Page
