Do you have a question about the Vantrue OnDash N2S and is the answer not in the manual?
| Video Resolution (Front) | 2560x1440P |
|---|---|
| Video Resolution (Rear) | 1920x1080P |
| Field of View (Front) | 170° |
| Field of View (Rear) | 140° |
| Screen Type | LCD |
| Loop Recording | Yes |
| Wi-Fi | Yes |
| Night Vision | Yes |
| Frame Rate | 30fps |
| Parking Mode | Yes |
| G-Sensor | Yes |
| Power Source | Car Charger |
| Storage | Supports up to 256GB |
| Operating Temperature | -20°C to 70°C |
| Power Supply | DC 5V |
Instructions for inserting and removing a microSD card into the dash cam. Use Class 10 or higher.
Steps to attach and secure the dash cam to the windshield using the suction mount.
Details on how to turn the dash cam on and off manually and automatically.
Guide to accessing and navigating the camera's setup menus and options.
Configuration options for video resolution, loop recording, IR LEDs, G-Sensor, and audio.
Settings for language, SD card formatting, time/date, auto LCD off, and device sound.
How to review and delete video files stored in Event, Normal, or All folders.
Instructions for setting the date and time on the dash cam manually.
Guide to changing video resolution settings for front-only or front+cabin recording.
How to configure the screen to automatically turn off to avoid distraction.
Explanation of how loop recording works and how to start/stop it.
Information about the IR LED light and its effect on cabin video footage.
How G-Sensor, collision, and motion detection trigger event recording and file locking.
Instructions on how to turn voice recording on or off for the dash cam.
How Collision Detection triggers recording and parking mode based on impact.
How combined Collision and Motion Detection activate parking mode and recording.
How Motion Detection activates parking mode and recording when movement is detected.
Explanation of Low Bitrates Recording, its resolution, and triggers.
How to use Time Lapse mode to create video montages from static photos.
Instructions for installing and activating the GPS mount and function.
How to view recorded videos on the dash cam itself or transfer them to a computer.
Steps for deleting event files and normal video files from the dash cam.
How the camera automatically updates firmware and how to stay updated.
Recommended operating temperatures and precautions to avoid damage.