- 24 -
Connect the camera to your computer using the supplied USB cable.
“USB Connecting” and “Power on” will be displayed on the camera
screen, please select “Power on” and press button to transfer data.
Depending on your computer OS, the device will appear either as a
removable drive or a removable volume.
Press and go to “Files”, press and button to navigate
to >“Event” or >“Normal” or >“All” file folders to view and playback
videos on the camera display. Use the buttons to select the
file and press button to playback/pause. During playback, and
button to fast forward, press button to resume playback speed.
7.
6.
1.
2.
3.
You can include GPS tracking and vehicle speed on the video
footage, go to “Record Setup”>“Stamp”>“GPS Location Stamp” and
“Speed Stamp” to set.
You can review recorded video using the VANTRUE® GPS Viewer
(available for download on www.vantrue.net).
4.13 Viewing Video on the Camera/Computer
or
or
Viewing files on a computer
Viewing files on camera
To Next Page
Loading...
