Install the External GPS Mount onto the camera.
Plug the Type C USB Connector into the GPS Mount to power it.
Once charged, the camera will power on. Recording will commence
if a microSD card has been inserted, just press the Button to stop
recording.
Press the button to enter setup, go to “System Setup ”>“GPS ” to
activate the camera’s GPS function.
The GPS receiver will start to search for a GPS signal, once the GPS
signal has been received, the GPS icon will be displayed on the
screen.
- 23 -
3840x2160P 25FPS
4-1-2021
4.12 GPS Function
4.
5.
2.
1.
3.
3840x2160P 25FPS
4-1-2021
When the camera is turned on again, it will record in time lapse
recording mode.
To Next Page
Loading...
