Vantrue OnDash N2S - Event Recording

- 13 -
In Front+Cabin mode when driving, you can press to switch display
to choose the front/inside camera show bigger on the lcd.
It can be switched to front recording following steps:
Go to “Record Setup”>“Resolution” > “Front”, press button, then
press button to change the options 3840x 2160P(30FPS);
2592x1520P(30FPS); 2560x1440P(30FPS); 1920x1080P(30FPS); 1280x
720P(30FPS) .
OK
Front + Cabin
Front
2592×1520P 30FPS
2560×1440P 30FPS
1920×1080P 30FPS
3840×2160P 25FPS
3840x2160P 25FPS
1-4-2021
or
1440P
Front Camera Bigger
1440P+1440P 30FPS
Inside Camera Bigger
1440P+1440P 30FPS
1-4-2021
1-4-2021
•