Vantrue OnDash N2S - Menu Settings; Record Setup

- 6 -
3.2 Installing the camera onto your windshield
Thoroughly clean the windshield using water or alcohol, and wipe
clean with a dry cloth.
Wipe the Suction Mounting Pad clean on the Suction Mount.
Securely attach the Suction Mount to the windshield, and rotate the
locking clamp on the mount 90° upward until it clicks.
Attach the Suction Mount to the camera’s Mount Connector, pushing
it in until it clicks.
1.
2.
3.
4.