Vantrue OnDash N2S - Switch Front + Cabin or Front Recording Mode Resolution

Resolution: Press button to change the options:
Front+Cabin：
1440P+1440P 30FPS; 1440P+1080P 30FPS; 1080P+1080P 30FPS;
1080P+720P 30FPS; 720P+1080P 30FPS; 720P+720P 30FPS;
Front:
3840×2160P 30FPS; 2592×1520P 30FPS; 2560×1440P 30FPS;
1920×1080P 30FPS; 1280×720P 30FPS;
Loop Recording: Press button to change the duration: 1Min,
3Min, 5Min and Off.
IR LEDS: Press button to change the options: Auto, On and
Off.
G-Sensor: Press button to change the sensitivity: 1, 2, 3, 4, 5
and Off.
Audio Recording: Press button to change the options:
OFF/ON.
- 9 -
After powering ON the camera, press the button to enter the setup
process. (If the camera is recording video, press the button to stop
recording before pressing the button.)
4.2 Menu Settings
Record Setup
OK
or
or
or
or
or
4.2.1 Record Setup
Press the button to enter the settings, and use the
buttons
to navigate the different options.
or
•
•
•
•
•