Vantrue OnDash N2S - Page 13

Parking Mode: Press button to change the options: Collision
Detection, Collision + Motion Detection, Motion Detection, Low Bitrates
Recording, OFF.
Exposure: Pressing gives the following options for Front or Cabin: +2.0,
+5/3, +4/3, +1.0, +2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3, -2.0.
WDR: Press button to change the options: OFF/ON.
Number Plate: Press button and to set your car license
number.
Stamp: Press button to change the options: OFF/ON. Stamp
shows the date/time, logo Stamp, Car Number,Speed and GPS
Location information.
Rotate Display: Press button to change the options: OFF/ON.
Time Lapse: Press button to change the options: Off, 1FPS,
5FPS.
Language: Press button to change the duration: English,
Simplified Chinese, Japanese, German, Italian, Spanish, French and
Russian.
Format SD Card: Select Format and press button to format the SD
card.
Time & Date: Press button and button to the current
date and time. Press the button to exit.
Auto LCD Off: If you choose 3 Min, it will turn off the camera screen 3
minutes after recording commences.
Press button to change the duration: Auto, 30Sec, 1Min,
3Min.
Device Sound: Press button to change the duration: 1, 2, 3,
4, 5 and OFF.
- 10 -
or
or
or
or
or
OK
OK
or
4.2.2 System Setup
or
or
or
or
OK
OK
•
•
•
•
•
•
•
•
•
•
•
•