EasyManua.ls Logo

Vantrue OnDash N2S - Motion Detection Triggered

Vantrue OnDash N2S
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Go to “Record Setup”> “Audio Recording”, press button and select
OFF;
While recording video, press the button to toggle voice recording
OFF/ON.
- 17 -
Event videos are stored in the “Video/Event” folder, and cannot be
automatically overwritten.
By default, the voice recording is ON. It can be turned OFF following
either of the methods below:
4.9 Audio Recording
OK
When the voice recording has been turned OFF, the MIC icon on the
screen will turn white with a red line across it.
3840x2160P 25FPS
4-1-2021
NOTE: The camera will auto overwrite old Event videos once the Event
folder has accumulated 30% of the card capacity. Please regularly
transfer important videos to your PC or another storage location (e.g.
external hard drive). To maintain good read/write performance, the
microSD card should better be formatted once a month.

Related product manuals