Vantrue N4 Pro User Manual

13
Front Camera Installation
Remove the protective film from the mount, then attach the mount and camera to the
electrostatic stickers.
Note: For a more secure bracket installation, we recommend applying bracket adhesion
promoter to both sides of the electrostatic sticker before attaching the bracket.
Rear Camera Installation
Select the installation position on the rear windshield. Remove the protective film from
the sticky pad and rear camera lens. Retrieve the rear camera cable and connect it to the
front main camera using the rear camera cable. Also, connect the car charger to power it
on.
After powering on the camera, choose a suitable location and install it.

Vantrue N4 Pro Specifications

General

Storage	Supports up to 512GB Micro SD card (not included)
HDR	Yes
Loop Recording	Yes
GPS	Built-in
G-Sensor	Built-in
Parking Mode	Yes
Night Vision	Yes
Operating Temperature	-10°C to 70°C (-4°F to 158°F)
Wi-Fi	2.4GHz
Power Source	Super Capacitor
Lens	Triple Lens (Front, Rear, Interior)