38
9. GPS Function
The GPS function is a crucial feature of the dash cam. By default, GPS is activated, and
the camera receives GPS signals via the GPS mount. This allows it to automatically adjust
the time and date according to your location, as well as record the geographic
coordinates of where the video was captured and the vehicle's speed at that moment.
Please keep in mind:
• The GPS connection typically establishes itself within 1 minute after powering on the
device. If the GPS connection does not succeed within this timeframe, kindly verify that
the GPS function on the device is enabled, the GPS bracket is correctly attached, and
that environmental factors (e.g., underground parking, densely populated residential
areas, subway, tunnels, etc.) are not hindering GPS signal reception.
• GPS data is seamlessly incorporated into the video footage. To access this information,
it's necessary to download and install the Vantrue App and Vantrue GPS Player, both
available for download at www.vantrue.net.
To Next Page
Loading...
Need help?
General
