Vantrue Element 3 - Low Framerate Mode

- 30 -
ENEN
[Normal Recording Time = Time Lapse Recording Time (Sec) x Recording
Frame Rate FPS/Time Lapse Option]
(Time should be converted into seconds)
Note:
Low Bitrate recording can only be engaged when the camera is turned
on. Once the camera is turned off, the Low Bitrate recording will not work.
Low Framerate mode
When the low framerate mode is selected, the camera will record
according to your selection among 1FPS/5FPS/10FPS/15FPS.
For example, if you select 1FPS and the current video resolution frame rate
is 30FPS, the camera will generate a 30FPS video per second. Low
framerate mode can greatly preserve the integrity of the video and save
space on the memory card.
14:39:07 02-10-2023
00:00:37
MP/H
35
1440P+1080P+1080P 30FPS
14:39:07 02-10-2023
00:00:37
MP/H
35
1440P+1080P+1080P 30FPS
14:39:07 02-10-2023
00:00:37
MP/H
35
1440P+1080P+1080P 30FPS