- 35 -
Replacing the remote control battery:
After successful connection, short press the button to lock the
current file and take a snapshot; continue to short press during the
locked video, and continue to capture the photo.
2.
After opening, gently pry the battery open from the groove in the front
of the battery compartment, then take out the old battery, put the new
battery in, and cover the back cover of the remote control.
2.
There is an "OPEN" mark on the bottom of the remote control, please
slowly pry open the surrounding gap along the groove position of this
mark to open.
1.
EN
EN
EN
EN
14:39:07 02-10-2023
00:00:37
MP/H
35
1440P+1080P+1080P 30FPS
To Next Page
Loading...
