Need help?Do you have a question about the Vaporesso Swag II and is the answer not in the manual?
Technical specifications for the Vaporesso Swag II mod.
Step-by-step guide on replacing the coil.
Process for filling the e-liquid, including versions.
Device stops if vaping exceeds 10 seconds.
Device stops for low/high resistance.
Device stops for short circuits.
Device stops if battery voltage is too low.
Device stops charging when fully charged.
Warnings for specific users and nicotine effects.
General| Dimensions | 75 x 50 x 25 mm |
|---|---|
| Battery | Single 18650 (Not Included) |
| Output Power | 5 - 80 W |
| Resistance Range | 0.03 - 5 Ω |
| Chipset | AXON Chip |
| Charging Current | 2 A |
| Thread | 510 |
| Tank Capacity | 3.5ml (NRG PE Tank) |
| Display | 0.91" OLED |
| Material | Zinc Alloy |
| Modes | Bypass, Pulse |
| Coil Compatibility | GT Coils |
| Color Options | Black, Silver, Blue, Red |
| Output Voltage | 0 - 8.5 V |
To Next Page