Need help?Do you have a question about the Vaporesso TARGET 200 and is the answer not in the manual?
Device closes output if resistance is below 0.1±0.01Ω.
Device closes output if no load resistance is detected.
Device closes output if resistance exceeds 5±0.5Ω.
Device closes output if battery voltage drops below 3.3±0.1V.
Device closes output if PCBA temperature exceeds 70+5℃/-10℃.
Device closes output if battery voltage is lower than 2.9±0.1V.
Device closes output if resistance is below 0.1±0.01Ω.
Device closes output if no load resistance is detected.
Device closes output if resistance exceeds 5±0.5Ω.
Device closes output if battery voltage drops below 3.3±0.1V.
Device closes output if PCBA temperature exceeds 70+5℃/-10℃.
Device closes output if battery voltage is lower than 2.9±0.1V.
General| Output Power | 5-220W |
|---|---|
| Display | 0.96 inch TFT Screen |
| Resistance Range | 0.1-5.0Ω |
| Tank Capacity | 8ml |
| Chipset | AXON Chip |
| Battery Capacity | 2 x 18650 batteries (not included) |
| Charging Current | 5V/2A |
| Coil Compatibility | Vaporesso GTi Coils |
| Material | Zinc Alloy |
| Modes | VW, Pulse, F(t) |
| Temperature Control | No |
To Next Page